How to clean your Apple airpods

Apple showcase features of new AirPods Pro

When you subscribe we will use the information you provide to send you these newsletters.Sometimes they’ll include recommendations for other related newsletters or services we offer.Our Privacy Notice explains more about how we use your data, and your rights.You can unsubscribe at any time.

Airpods, or any headphones in general, tend to get a lot of use and can become extremely dirty very quickly. As Airpods are pushed into your ear, the build-up of earwax and bacteria is common – and can shorten the life of your Airpods.

How to clean AirPods

Apple advises you should use a “soft, dry, lint free cloth” to clean the exterior housing and stems of your AirPods.

You must also be careful to “make sure not get any liquid in the openings”.

Most day-to-day dirt or earwax can be removed using a very small amount of cleaner on the outside casing of the AirPods.

However, Apple advises against using soaps and shampoos – anything that can create an excess of moisture.

Just be careful not to overdo it so you don’t break them by getting unwanted liquids in the speaker.

To clean the speaker, Apple advises using a dry cotton swab to clean out any unwanted dirt or built-up earwax.

Apple says you should never use a sharp object to clean the speakers as this can permanently damage your AirPods.

Apply as little pressure as possible when cleaning the grill area

Although Apple doesn’t advise you to do so, many online guides say you should clean out any unwanted dirt from the speaker using a wooden toothpick.

Never use a sharp metal object like a needle to do the same job – this could permanently damage your earphones.

Another hack is to use Blu Tack – again, not recommended by Apple, but works well.

DON’T MISS
Use Zoom? Beware of terrifying new sex scam that could cost you [INSIGHT]
Netflix confirms the news AirPods owners didn’t want to hear [REPORT]
Your Samsung Galaxy Watch will unlock a critical feature tomorrow [INSIGHT]

Press a small amount of Blu Tack into the earbud speaker mesh, and then pull it out quickly.

Repeat this process until you pull all the grime out of your AirPods.

However, de careful not to push the Blu-tack too far into the earbud.
If you have AirPods Pro, you can remove the earbuds and soak them in water.

Be sure to rinse and leave to completely dry before reattaching them to your earbuds.

To clean your AirPods charging case, Apple advises using a microfibre cloth to wipe down the exterior of the case.

If this isn’t enough and your case has stubborn marks or stains, you can use 70 percent isopropyl alcohol.

Alternatively, you could use a disinfectant wipe as these do not contain excess moisture and risk damaging your earbuds.

Use a small amount on the cloth and wipe over, being careful not to get any liquid whatsoever in the charging ports as this can break or damage your AirPods.

Source: Read Full Article